Multiprocess Welder: Multimatic 255, DC, MIG/Stick Pack w/Running Gear
Item: 494D90,
MFR: 951767,
Brand: MILLER ELECTRIC
| Series | Multimatic 255 |
| Welding Processes | Flux-Cored Welding (FCAW), TIG Welding (GTAW), Stick Welding (SMAW), MIG Welding (GMAW) |
| Enhanced Process | Pulsed TIG (GTAW-P), Pulsed MIG (GMAW-P) |
| Phase | Single-Phase |
| Input Frequency | 50/60 Hz |
| Polarity | DC |
| Input Voltage (Nominal) | 208V, 460V, 575V, 240V |
| Max. Amperage Range (Stick) | 150 A - 300 A |
| Rated Output at Duty Cycle (Stick) | 200 A @ 60% |
| Max. Amperage Range (TIG) | 150 A - 300 A |
| Max. Amperage Range (MIG) | Greater than 300 A |
| Welding Mode | CC/CV |
| For Wire Type | Flux-Cored, Aluminum, Solid |
| Max. Wire Diameter | 0.045 in (Solid) |
| Maximum Wire Feed Speed | 800 in/min |
| Plug Type | Bare Leads |
| Kit Includes | Contact Tips, Running Gear, Stick Electrode Holder with Cable, Flow Gauge/Regulator & Gas Hose, MIG Gun, Drive Rolls, Work Cable with Clamp |
| Remote Connection Type | 14-Pin (Miller) |
| TIG Arc Start Feature | Lift Arc Start |