Power Punching Tools

Image 1

Power punching tools create round holes in sheet metal and other thin, flat materials. Their draw stud pulls a sharp-edged punch from one side of the sheet metal toward the die on the other side to cut a clean, accurate hole. Also called panel punches, they are commonly used to make openings for conduit and wiring in electrical boxes and panels. Cordless knockout punches drive through materials more quickly and with less effort than manual punches.

◀◀   ◀   ▶   ▶▶

Punch and Die Set: 7/8 in Bolt Size (In.), 0.56 Cold Rolled C-1018, 0.56 in Boilerplate

Arbor Press: 1/2 ton Force in Tons, 6 1/2 in Swing (In.), 3-1/2, 5/16 to 15/16

Arbor Press: 2 ton Force in Tons, 11 3/8 in Swing (In.)

Punch and Die Set: 1 in Bolt Size (In.), 0.56 Cold Rolled C-1018, 0.56 in Boilerplate

Arbor Press: 1/2 ton Force in Tons, 6 1/2 in Swing (In.), 4 x 4 in, 9/16 to 1-1/16

Arbor Press: 1/2 ton Force in Tons, 7 1/2 in Swing (In.), 3-3/8 x 5, 3/8 to 3/4

Knockout Tool Kit: 18V DC, 6 in Punching Capacity (Steel), For 12 ga Max. Steel Thick

Punch and Die Set: 3/4 in Bolt Size (In.), 0.56 Cold Rolled C-1018, 0.56 in Boilerplate

Knockout Tool Kit: 18V DC, 4 in Punching Capacity (Steel), For 10 ga Max. Steel Thick

Punch and Die Set: 1/2 in Bolt Size (In.), 0.53 Cold Rolled C-1018, 0.53 in Boilerplate

Arbor Press: 1 1/2 ton Force in Tons, 8 in Swing (In.), 4-7/16, 9/16 to 1-1/16

Knockout Tool Kit: 18V DC, 4 in Punching Capacity (Steel), For 10 ga Max. Steel Thick

Arbor Press: 3 ton Force in Tons, 7 in Swing (In.), 6.5 x 8-3/4, 5/8 to 1-1/2

Arbor Press: 1 ton Force in Tons, 8 in Swing (In.), 4-1/2 x 6, 1/2 to 1-1/4

Arbor Press: 5 ton Force in Tons, 10 in Swing (In.), 9-1/4 x 10, 1-3/8 to 4-5/8

Arbor Press: 3 ton Force in Tons, 7 in Swing (In.), 5.5 x 5.5, 13/16 to 1-13/16

Arbor Press: 2 ton Force in Tons, 11 7/8 in Swing (In.), 6-5/8 x 7-1/2, 3/4 to 1-13/16

Arbor Press: 3 ton Force in Tons, 17 1/2 in Swing (In.), 6-3/4 x 8.5, 5/8 to 2

Hydraulic Punch Set: 3/8 in_1/2 in_5/8 in_34 in Bolt Size (In.), 0.38_0.5 Cold Rolled C-1018

Knockout Tool Kit: 18V DC, 6 in Punching Capacity (Steel), For 12 ga Max. Steel Thick

◀◀   ◀   ▶   ▶▶